If you’re a gamer, you know that the most frustrating thing can be when your game suddenly freezes or stops responding. This can happen for many reasons, with one of the most common being Connection Reset by peer. This occurs when there’s an interruption in your connection to another user (whether they’re playing on your console or on theirs). There are several ways to fix this problem and make sure it doesn’t happen again!
1. Turn off your firewall
- Turn off your firewall
If you’re using a third-party firewall program, there’s a chance that it’s blocking the connection to the internet. You can fix this by going into your firewall settings and turning it off. First, open up your Control Panel and navigate through Network & Internet > Windows Firewall > Advanced Settings. If you see an option labeled “Turn Windows Firewall on or off,” select that and click ‘Off.’ After restarting your computer and trying again, if your problem still persists then move onto step 2!
2. Change the proxy settings in your browser
If you’re using a browser to access the internet, the easiest way to fix your connection reset by peer problem is to change the proxy settings on your browser.
How? Just follow these simple instructions:
- Go to Settings in whatever browser you use, and then look for Proxy or Advanced Tools settings. You can also try clicking on View>Internet Options>Connections>LAN Settings and checking if there are any proxy options listed there.*
- If not, try searching for “Proxy” under Help > About
3. Disable IPv6
- Disable IPv6
- Open a command prompt window and enter “netsh interface IPv6 show” to see if IPv6 is enabled on your network adapter.
- If you find that it is enabled, then you can disable it by using the following command: netsh interface ipv6 set state disabled
4. Clear your DNS cache
Clearing your DNS cache should help you access the sites you need. Your DNS cache stores the IP addresses of recently accessed sites, so if you’ve visited a site recently and then have trouble accessing it, clearing your cache can solve that problem.
The location of your DNS cache depends on what kind of router or modem you have. For most cable or DSL routers, the DNS is located in firmware that comes with the device (like an Actiontec or Netgear modem). Other types of modems may store their DNS information in a separate device like an AirPort Extreme Base Station. If this is true for you, try performing a reboot on that device first before attempting to clear your router’s data.
If neither option works for clearing your router’s data and fixing connection reset by peer errors, try using ipconfig /flushdns as an alternative method:
5. Update your network drivers
- Update your network drivers
Your network driver is the software that allows your computer to communicate with your printer, camera or other devices on a network. It communicates with the hardware in your computer and the device you are trying to connect to. If you have an older network card or one that has not been updated in a while, it may not be capable of handling higher speeds and can cause problems when connecting to peer-to-peer networks like those provided by modern broadband connections. The best way to determine whether your card needs updating is by running an internet speed test from our website at https://www.speedtest.net/. If this shows that you are getting less than half of what is advertised for download speeds on your plan then it’s likely time for an upgrade!
You can fix Connection Reset by peer by turning off your firewall, changing the proxy settings, etc.
If you’re using a firewall or proxy, you should turn it off as they can cause connection resets.
If you have IPv6 enabled, disable it and see if that solves your problem.
Uninstall network drivers and download updated ones from the manufacturer.
Conclusion
We hope that you found this article useful. We are committed to providing our readers with the best content possible, so if there is anything else we can help you with please contact us at [email protected]